-
Products
-
-
-
-
-
Standard
Scope of Application
Specifies the dimensional and shape tolerances for 0.3–6mm continuous cold-rolled stainless steel products (cold-rolled stainless steel products, excluding hot-rolled or coated materials).
Core Technical Requirements
Thickness Tolerance: Classified by material width and thickness grade (e.g., the thickness tolerance for thin plates with width ≤1250 mm is ±0.02 mm);
Width Tolerance: Narrow strip width allows a deviation of ±0.5 mm, wide strip ±1.0 mm;
Shape Tolerance: Including flatness, edge straightness, etc., e.g., the flatness deviation within each meter length of narrow strip steel is ≤2 mm
Remarks
Material